VAG MQB EA888 Turbo Flanges - Image 1
VAG MQB EA888 Turbo Flanges - Image 2
VAG MQB EA888 Turbo Flanges - Image 3
VAG MQB EA888 Turbo Flanges - Image 4
VAG MQB EA888 Turbo Flanges - Image 5
VW Mk7/Mk7.5 GTI/R / Audi S3 8V – AToM Race V2 Carbon Cold Air Intake (EA888.3)

VAG MQB EA888 Turbo Flanges

$50.00

Precision turbo flanges for MQB EA888 Gen 3 (1.8 / 2.0 TSI). Replacement and fabrication components for workshop builds. Full vehicle list and specs in the description below.

SKU: BLZ-FLG-MQB Categories: , , , , , , , , Tags: ,

Description

Vehicle fitment guide

What this is — turbo-swap accessory

These are precision turbo flanges sold as an accessory for the AToM RACE V2 induction kit. They are intended for builders who are upgrading the turbocharger on a Blaze AToM RACE V2 installation, where the new turbo’s inlet geometry requires re-mating the existing intake system.

Use case: EA888 Gen 3 turbo upgrade on a car already running (or being built around) the AToM RACE V2 100 mm intake.

Compatible kit:

Vehicle platform (inherits from RACE V2): any car running an MQB EA888 Gen 3 (1.8 / 2.0 TSI) on the RACE V2 fitment list, undergoing a turbocharger upgrade.

⚠ Not a bolt-on consumer upgrade

These flanges are fabrication / build components. They are intended for workshops, tuners and experienced builders fitting an aftermarket turbo to an existing AToM RACE V2 setup. If you are unsure whether your build needs them, email sales@blazeperformance.com with your turbo specs before ordering.

About this kit
Features:
  • CNC Machined Billet Turbo Couplings
  • Turbo Specific Flanges
Specifications:
       Suitable for
  • Garrett IS12/20/38
  • Garrett IS38 Hybrid (Vortex XL, TTE, Littco, CTS, LM series) (56mm Internal Diameter)
  • Garrett Power MAX (Stages 1 & 2) – via 2-bolt flange
  • APR DTR6054, TPC, RAC, Mabo – via 3-bolt flange
Vehicle Fitment Guide: Left and Right Hand Drive Vehicles:
  • VW Golf 7 & 7.5 GTI & Clubsport 2013+ 5G | VW Golf 7 & 7.5R 2013+ 5G | VW Golf 7 & 7.5 1.8 TSI 2013+ 5G | VW Passat 2.0 TSI B8 2015+ 3G | VW Arteon 2.0 TSI 2017+ | VW T-Roc R 2.0 TSI 2019+ | Audi A3 2.0 TSI / 1.8 TSI 2013+ 8V | Audi S3 2013+ 8V
  • Audi TT 2.0 TSI III 2014+ 8S | Audi SQ2 2018+ | Audi Q3 45TFSI 2.0 TSI 2018+ | SEAT Leon Cupra III 2014+ 5F | SEAT Leon 1.8 TSI 2014+ 5F | SEAT Ateca Cupra 2.0 TSI 2018+ | Skoda Octavia vRS III 2014+ 5E |Skoda Superb III 1.8 / 2.0 TSI 2015+ B8 3V
Frequently asked questions

What are these turbo flanges for?

They are precision-machined replacement flanges used in turbo, downpipe and intake fabrication on MQB EA888 Gen 3 platforms. Most buyers are workshops, fabricators or tuners building custom turbo or exhaust solutions.

Will these flanges fit my application?

They are dimensionally matched to OEM EA888 Gen 3 1.8 and 2.0 TSI mounting patterns. See the “Fits these vehicles” box above for the engine platforms they support. If you are fabricating for a non-listed application, contact us with the specifications.

Are these for end-user installation?

These flanges are intended as fabrication components, not a bolt-on consumer upgrade. They are best handled by a workshop with welding and turbo-fitting experience.

Additional information

Turbo

Stock Turbo (IS12 / IS20 / IS38 / Vortex STD), IS38 Hybrid (Vortex XL / TTE / Littco / CTS / LM), Garrett PowerMax, APR DTR6054
Brand

Turbo Connection Flange

Match the intake to the turbo.

Related Products