R600 Replacement Air Filter 100mm (4″)
$130.00
Replacement R600 4-inch (100 mm) high-flow filter for MQB EA888 Gen 3 intake systems. Direct swap, no modifications required. Full vehicle list and specs in the description below.
- Description
- Additional information
Description
Vehicle fitment guide
Service / replacement filter — fits these kits
A 100 mm (4″) high-flow dry cotton filter sold as a direct service replacement. It will fit any 100 mm intake pipe — Blaze, Racingline R600, or any other 4-inch system.
Blaze kits this filter fits:
- AToM RACE V2 — Cold Air Intake (100 mm)
- AToM RACE V2 Carbon — Cold Air Intake (100 mm)
- AToM RACE — 1.8 TSI EA888.3 (Polo 6C, 100 mm)
- AToM RACE 2.5T — RS3 / TT RS (100 mm)
- VAG MQB EA888 R600 Upgrade Kit (100 mm)
- VAG MQB EA888 Turbo Inlet Pipe (100 mm)
Filter spec: 4″ (100 mm) inlet, dry cotton, washable and reusable.
Also fits: any third-party 100 mm intake or turbo inlet pipe (e.g. Racingline R600). If your intake is not 100 mm, this filter will not fit — check the inlet diameter on your existing pipe before ordering.
About this kit
- Fits VAG MQB EA888 Racingline R600 Induction Kit
- 100mm (4inch) dry cotton filter allows greater airflow
- Increased power and torque.
- Dry Cotton Filter with 100mm (4 Inch) outlet.
- Stainless steel clamps
- VW Golf 7 & 7.5 GTI & Clubsport 2013+ 5G | VW Golf 7 & 7.5R 2013+ 5G | VW Golf 7 & 7.5 1.8 TSI 2013+ 5G | VW Passat 2.0 TSI B8 2015+ 3G | VW Arteon 2.0 TSI 2017+ | VW T-Roc R 2.0 TSI 2019+ | Audi A3 2.0 TSI / 1.8 TSI 2013+ 8V | Audi S3 2013+ 8V
- Audi TT 2.0 TSI III 2014+ 8S | Audi SQ2 2018+ | Audi Q3 45TFSI >2.02018+ | SEAT Leon Cupra III 2014+ 5F | SEAT Leon 1.8 TSI 2014+ 5F | SEAT Ateca Cupra 2.0 TSI 2018+ | Skoda Octavia vRS III 2014+ 5E |Skoda Superb III 1.8 / 2.0 TSI 2015+ B8 3V
Frequently asked questions
Which intake kits does this filter fit?
See the “Fits these vehicles” box above for compatibility. This is a direct-swap replacement filter element designed to fit specific Blaze AToM intake kits — no modifications needed.
How often should I replace the filter?
In normal road use, inspect the filter every 10,000–15,000 km and clean or replace if visibly dirty. In dusty environments or track use, inspect more frequently. The filter is washable cotton — refer to the cleaning kit instructions if you choose to clean rather than replace.
Can I install the filter myself?
Yes. The replacement takes a few minutes — remove the old filter element from the intake housing and slot in the new one. No tools required beyond what is needed to access the intake.
Additional information
| Brand |
|---|