TT 8S Archives - Blaze Performance https://blaze-performance.com/product-tag/tt-8s/ Wed, 28 Oct 2026 11:13:59 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.4 https://blaze-performance.com/wp-content/uploads/2025/01/cropped-Social-Logo-32x32.jpg TT 8S Archives - Blaze Performance https://blaze-performance.com/product-tag/tt-8s/ 32 32 AToM Pro and Race – Replacement Filter (120mm / 4.7inch) https://blaze-performance.com/product/atom-pro-and-race-replacement-filter-120mm-4-7inch/ Mon, 24 Feb 2025 17:57:30 +0000 https://blaze-performance.com/?post_type=product&p=3794 Replacement 120 mm (4.7″) dry cotton filter for Blaze AToM Pro and Race intake kits. Direct swap, no modifications. Full vehicle list and specs in the description below.

The post AToM Pro and Race – Replacement Filter (120mm / 4.7inch) appeared first on Blaze Performance.

]]> Vehicle fitment guide

Service / replacement filter — fits these kits

A 120 mm (4.7″) high-flow dry cotton filter sold as a direct service replacement for the AToM Pro and Race induction kits.

Blaze kits this filter fits:

Filter spec: 4.7″ (120 mm) inlet, dry cotton, washable and reusable.

Note: This is the larger 120 mm service filter for the AToM Pro and Race kits. If your kit uses a smaller filter (e.g. the AToM Pro 1.4 or CAVE), this will not fit — check your existing filter diameter before ordering.

About this kit
Features:
  • Replacement filter for AToM Race and AToM Pro Case
  • 120mm (4.7 inch) dry cotton filter allows greater airflow
  • Increased power and torque.
Specifications:
  • Dry Cotton Filter with 120mm (4.7 Inch) outlet.
  • Stainless steel clamps
Frequently asked questions

Which intake kits does this filter fit?

See the “Fits these vehicles” box above for compatibility. This is a direct-swap replacement filter element designed to fit specific Blaze AToM intake kits — no modifications needed.

How often should I replace the filter?

In normal road use, inspect the filter every 10,000–15,000 km and clean or replace if visibly dirty. In dusty environments or track use, inspect more frequently. The filter is washable cotton — refer to the cleaning kit instructions if you choose to clean rather than replace.

Can I install the filter myself?

Yes. The replacement takes a few minutes — remove the old filter element from the intake housing and slot in the new one. No tools required beyond what is needed to access the intake.

The post AToM Pro and Race – Replacement Filter (120mm / 4.7inch) appeared first on Blaze Performance.

]]> VAG MQB EA888 Turbo Flanges https://blaze-performance.com/product/vag-mqb-ea888-turbo-flanges/ Thu, 12 Dec 2024 04:41:23 +0000 https://blaze-performance.com/?post_type=product&p=3748 Precision turbo flanges for MQB EA888 Gen 3 (1.8 / 2.0 TSI). Replacement and fabrication components for workshop builds. Full vehicle list and specs in the description below.

The post VAG MQB EA888 Turbo Flanges appeared first on Blaze Performance.

]]> Vehicle fitment guide

What this is — turbo-swap accessory

These are precision turbo flanges sold as an accessory for the AToM RACE V2 induction kit. They are intended for builders who are upgrading the turbocharger on a Blaze AToM RACE V2 installation, where the new turbo’s inlet geometry requires re-mating the existing intake system.

Use case: EA888 Gen 3 turbo upgrade on a car already running (or being built around) the AToM RACE V2 100 mm intake.

Compatible kit:

Vehicle platform (inherits from RACE V2): any car running an MQB EA888 Gen 3 (1.8 / 2.0 TSI) on the RACE V2 fitment list, undergoing a turbocharger upgrade.

⚠ Not a bolt-on consumer upgrade

These flanges are fabrication / build components. They are intended for workshops, tuners and experienced builders fitting an aftermarket turbo to an existing AToM RACE V2 setup. If you are unsure whether your build needs them, email sales@blazeperformance.com with your turbo specs before ordering.

About this kit
Features:
  • CNC Machined Billet Turbo Couplings
  • Turbo Specific Flanges
Specifications:
       Suitable for
  • Garrett IS12/20/38
  • Garrett IS38 Hybrid (Vortex XL, TTE, Littco, CTS, LM series) (56mm Internal Diameter)
  • Garrett Power MAX (Stages 1 & 2) – via 2-bolt flange
  • APR DTR6054, TPC, RAC, Mabo – via 3-bolt flange
Vehicle Fitment Guide: Left and Right Hand Drive Vehicles:
  • VW Golf 7 & 7.5 GTI & Clubsport 2013+ 5G | VW Golf 7 & 7.5R 2013+ 5G | VW Golf 7 & 7.5 1.8 TSI 2013+ 5G | VW Passat 2.0 TSI B8 2015+ 3G | VW Arteon 2.0 TSI 2017+ | VW T-Roc R 2.0 TSI 2019+ | Audi A3 2.0 TSI / 1.8 TSI 2013+ 8V | Audi S3 2013+ 8V
  • Audi TT 2.0 TSI III 2014+ 8S | Audi SQ2 2018+ | Audi Q3 45TFSI 2.0 TSI 2018+ | SEAT Leon Cupra III 2014+ 5F | SEAT Leon 1.8 TSI 2014+ 5F | SEAT Ateca Cupra 2.0 TSI 2018+ | Skoda Octavia vRS III 2014+ 5E |Skoda Superb III 1.8 / 2.0 TSI 2015+ B8 3V
Frequently asked questions

What are these turbo flanges for?

They are precision-machined replacement flanges used in turbo, downpipe and intake fabrication on MQB EA888 Gen 3 platforms. Most buyers are workshops, fabricators or tuners building custom turbo or exhaust solutions.

Will these flanges fit my application?

They are dimensionally matched to OEM EA888 Gen 3 1.8 and 2.0 TSI mounting patterns. See the “Fits these vehicles” box above for the engine platforms they support. If you are fabricating for a non-listed application, contact us with the specifications.

Are these for end-user installation?

These flanges are intended as fabrication components, not a bolt-on consumer upgrade. They are best handled by a workshop with welding and turbo-fitting experience.

The post VAG MQB EA888 Turbo Flanges appeared first on Blaze Performance.

]]> VW Mk7/Mk7.5 GTI/R / Audi S3 8V – AToM Race V2 Carbon Cold Air Intake (EA888.3) https://blaze-performance.com/product/vag-mqb-ea888-3-atom-race-carbon-100mm-4-full-induction-kit/ Thu, 12 Dec 2024 03:26:26 +0000 https://blaze-performance.com/?post_type=product&p=3732 Carbon-finished race-spec cold air intake for MQB EA888 Gen 3 2.0 TSI. 100 mm (4″) inlet, direct fit, no tune required. Full vehicle list and specs in the description below.

The post VW Mk7/Mk7.5 GTI/R / Audi S3 8V – AToM Race V2 Carbon Cold Air Intake (EA888.3) appeared first on Blaze Performance.

]]> Vehicle fitment guide VW
  • Golf 7 / 7.5 R (2013-2020)
  • Golf 7 / 7.5 GTI & Clubsport (2013-2020)
  • Golf 7 / 7.5 1.8 TSI (2013-2020)
  • Passat B8 2.0 TSI (2015+)
  • Arteon 2.0 TSI (2017-2020)
  • T-Roc 2.0 TSI (2017-2022)
  • Tiguan II 2.0 TSI (2016-2020)
  • Tiguan II 2.0 TSI 245ps (2021+)
  • Jetta / GLI Mk7 (2018+)
Audi
  • S3 8V (2013-2020)
  • A3 2.0 / 1.8 TSI 8V (2013-2020)
  • TT Mk3 8S (2014+)
  • TTS 2.0 TFSI 8S (2015-2021)
  • TT 2.0 TFSI 8S (2014+)
  • SQ2 (2018+)
  • Q3 45 TFSI 2.0 TSI (2018+)
Cupra / SEAT
  • SEAT Leon III Cupra 5F (2014-2020)
  • SEAT Leon III 1.8 TSI 5F (2014-2020)
  • Cupra Ateca (2018+)
  • SEAT Tarraco 2.0 TSI (2018+)
Skoda
  • Octavia III vRS 2.0 TSI 5E (2014-2020)
  • Superb III 1.8 / 2.0 TSI 3V (2015+)
Engine platform: MQB EA888 Gen 3 (1.8 & 2.0 TSI)  |  Inlet: 100 mm (4″) — carbon finish Mk8 / Mk8.5 GTI? This kit fits Mk7 (EA888 Gen 3) only. The Mk8 GTI uses the EA888 evo4 with a Garrett turbo and needs our dedicated AToM V2 Mk8 GTI intake. Mk8 R / 8Y S3 / Cupra Leon Mk4 / Arteon R / Tiguan R 320ps / TTS EA888.4? Those run the EA888.4 evo4 engine — see our AToM R8CE intake instead.
The Blaze Performance Turbo Inlet System fits the following models:
  • Volkswagen:
    • Golf 7 & 7.5 GTI & Clubsport (2013+ 5G)
    • Golf 7 & 7.5 R (2013+ 5G)
    • Golf 7 & 7.5 1.8 TSI (2013+ 5G)
    • Passat 2.0 TSI B8 (2015+ 3G)
    • Arteon 2.0 TSI (2017+)
    • T-Roc R 2.0 TSI (2019+)
  • Audi:
    • A3 2.0 TSI / 1.8 TSI (2013+ 8V)
    • S3 (2013+ 8V)
    • TT 2.0 TSI III (2014+ 8S)
    • SQ2 (2018+)
    • Q3 45TFSI 2.0 TSI (2018+)
  • SEAT:
    • Leon Cupra III (2014+ 5F)
    • Leon 1.8 TSI (2014+ 5F)
    • Ateca Cupra 2.0 TSI (2018+)
  • Skoda:
    • Octavia vRS III (2014+ 5E)
    • Superb III 1.8 / 2.0 TSI (2015+ B8 3V)
About this kit
Enhance your vehicle’s performance with the Blaze Performance Turbo Inlet System, specifically engineered for various VW, Audi, SEAT, and Skoda models. This system is designed to improve turbo spool, torque, and overall power, delivering a smooth and efficient driving experience. With a robust build, versatile turbo compatibility, and precision-engineered airflow design, this is the ultimate upgrade for performance enthusiasts seeking optimal engine response.
The Blaze Performance Turbo Inlet System is designed for enthusiasts seeking to unlock the full potential of their vehicle. With its wide turbo compatibility and optimized airflow design, this system offers substantial gains in turbo efficiency, torque, and power. Crafted from premium materials and engineered for a precise fit, this is the ultimate performance upgrade for your vehicle’s turbo system.Enhance your driving experience and maximize your vehicle’s performance with the Blaze Performance Turbo Inlet System. Order today for fast shipping and excellent customer support!
Key features
  • Full-Width, Stepped Back Air Guide: Directs airflow from both grille inlet ducts without obstruction. The air guide seals against the hood, creating a clean passage into the 120mm filter inlet, maximizing ram air effect and reducing turbulence.
  • Reverse Mounted, Washable 120mm (4.7″) Dry Cotton Filter: Featuring a large-diameter inlet, this filter minimizes airflow resistance, ensuring a smooth and substantial flow of air. The outlet is specifically shaped to optimize air exit.
  • Full Carbon  – 100mm (4″) Outlet with Heat Shield: Housed in a Carbon Fiber casing, the air filter is protected from engine bay heat, maintaining a cool airflow. The 100mm outlet provides a high-volume passage for uninterrupted airflow.
  • 100mm to 76mm (4″ to 3″) Turbo Inlet Hose: This 4-ply, wire-reinforced silicone hose tapers from 100mm at the inlet to 76mm at the outlet, ensuring minimal turbulence. The silicone also acts as a heat insulator, improving airflow efficiency.
  • Large Diameter Flanges for Turbo Compatibility: The 76mm (3″) outlet accommodates a large inlet flange, allowing the system to be compatible with various turbocharger setups. The design eliminates restrictive elbows, maximizing airflow to the turbo.
Specs & compatibility
The Blaze Performance Turbo Inlet System is compatible with the following turbochargers:
  • Garrett IS12/20/38
  • Garrett IS38 Hybrid (Vortex XL, TTE, Littco, CTS, LM series)
  • Garrett Power MAX (Stages 1 & 2) – via 2-bolt flange
  • APR DTR6054, TPC, RAC, Mabo – via 3-bolt flange
  • EQT Typhoon/CTS BOSS 700 – direct coupling to turbo
  • 100mm (4″) Outlet: Carbon Fiber, closed casing, available in Gloss or Matte Carbon
  • 120mm (4.7″) Dry Cotton Filter: Reusable and washable for long-term use
  • 4-Ply Silicone Turbo Inlet Hose: Steel-reinforced for durability
  • Multiple Turbo Fitment Options: Compatible with stock, hybrid, and big turbos
  • Stainless Steel Clamps and VITON O-Ring Seal
  • Bolt-on Fitment: Easy installation for both LHD and RHD models
Frequently asked questions

Will this intake fit my car?

This kit is designed and validated for the vehicles listed in the “Fits these vehicles” box above. If your year, model and engine code match, it is a direct-fit installation. If you are unsure, email sales@blazeperformance.com with your VIN and we will confirm fitment.

Do I need a tune (remap) to run this intake?

No — the kit is designed to work safely on a stock ECU map. You will get airflow and intake-note gains either way. If you are already running a Stage 1 or higher tune, this intake is fully compatible.

Is the install reversible?

Yes. The kit bolts on using the existing OEM mounting points and the original airbox can be re-installed at any time. There is no cutting, drilling or permanent modification.

Off-road or street legal?

Blaze Performance products are sold for closed-course, off-road and motorsport competition use. Local regulations on emissions and intake modifications vary by country — please check your local laws before fitting to a road-registered vehicle.

The post VW Mk7/Mk7.5 GTI/R / Audi S3 8V – AToM Race V2 Carbon Cold Air Intake (EA888.3) appeared first on Blaze Performance.

]]> VW Mk7/Mk7.5 GTI/R / Audi S3 8V – AToM Race V2 100mm Cold Air Intake (EA888.3) https://blaze-performance.com/product/vag-mqb-ea888-atom-race-v2-100mm-4-full-induction-kit/ Fri, 08 Dec 2023 14:05:29 +0000 https://blaze-performance.com/?post_type=product&p=3269 Race-spec cold air intake for MQB EA888 Gen 3 2.0 TSI. 100 mm (4″) inlet. Direct fit, no tune required. Full vehicle list and specs in the description below.

The post VW Mk7/Mk7.5 GTI/R / Audi S3 8V – AToM Race V2 100mm Cold Air Intake (EA888.3) appeared first on Blaze Performance.

]]> Vehicle fitment guide VW
  • Golf 7 / 7.5 R (2013-2020)
  • Golf 7 / 7.5 GTI & Clubsport (2013-2020)
  • Golf 7 / 7.5 1.8 TSI (2013-2020)
  • Passat B8 2.0 TSI (2015+)
  • Arteon 2.0 TSI (2017-2020)
  • T-Roc 2.0 TSI (2017-2022)
  • Tiguan II 2.0 TSI (2016-2020)
  • Tiguan II 2.0 TSI 245ps (2021+)
  • Jetta / GLI Mk7 (2018+)
Audi
  • S3 8V (2013-2020)
  • A3 2.0 / 1.8 TSI 8V (2013-2020)
  • TT Mk3 8S (2014+)
  • TTS 2.0 TFSI 8S (2015-2021)
  • TT 2.0 TFSI 8S (2014+)
  • SQ2 (2018+)
  • Q3 45 TFSI 2.0 TSI (2018+)
Cupra / SEAT
  • SEAT Leon III Cupra 5F (2014-2020)
  • SEAT Leon III 1.8 TSI 5F (2014-2020)
  • Cupra Ateca (2018+)
  • SEAT Tarraco 2.0 TSI (2018+)
Skoda
  • Octavia III vRS 2.0 TSI 5E (2014-2020)
  • Superb III 1.8 / 2.0 TSI 3V (2015+)
Engine platform: MQB EA888 Gen 3 (1.8 & 2.0 TSI)  |  Inlet: 100 mm (4″) Mk8 / Mk8.5 GTI? This kit fits Mk7 (EA888 Gen 3) only. The Mk8 GTI uses the EA888 evo4 with a Garrett turbo and needs our dedicated AToM V2 Mk8 GTI intake. Mk8 R / 8Y S3 / Cupra Leon Mk4 / Arteon R / Tiguan R 320ps / TTS EA888.4? Those run the EA888.4 evo4 engine — see our AToM R8CE intake instead.
The Blaze Performance Turbo Inlet System fits the following models:
  • Volkswagen:
    • Golf 7 & 7.5 GTI & Clubsport (2013+ 5G)
    • Golf 7 & 7.5 R (2013+ 5G)
    • Golf 7 & 7.5 1.8 TSI (2013+ 5G)
    • Passat 2.0 TSI B8 (2015+ 3G)
    • Arteon 2.0 TSI (2017+)
    • T-Roc R 2.0 TSI (2019+)
  • Audi:
    • A3 2.0 TSI / 1.8 TSI (2013+ 8V)
    • S3 (2013+ 8V)
    • TT 2.0 TSI III (2014+ 8S)
    • SQ2 (2018+)
    • Q3 45TFSI 2.0 TSI (2018+)
  • SEAT:
    • Leon Cupra III (2014+ 5F)
    • Leon 1.8 TSI (2014+ 5F)
    • Ateca Cupra 2.0 TSI (2018+)
  • Skoda:
    • Octavia vRS III (2014+ 5E)
    • Superb III 1.8 / 2.0 TSI (2015+ B8 3V)
About this kit
Enhance your vehicle’s performance with the Blaze Performance Turbo Inlet System, specifically engineered for various VW, Audi, SEAT, and Skoda models. This system is designed to improve turbo spool, torque, and overall power, delivering a smooth and efficient driving experience. With a robust build, versatile turbo compatibility, and precision-engineered airflow design, this is the ultimate upgrade for performance enthusiasts seeking optimal engine response.
The Blaze Performance Turbo Inlet System is designed for enthusiasts seeking to unlock the full potential of their vehicle. With its wide turbo compatibility and optimized airflow design, this system offers substantial gains in turbo efficiency, torque, and power. Crafted from premium materials and engineered for a precise fit, this is the ultimate performance upgrade for your vehicle’s turbo system.
Enhance your driving experience and maximize your vehicle’s performance with the Blaze Performance Turbo Inlet System. Order today for fast shipping and excellent customer support!
Key features
  • Full-Width, Stepped Back Air Guide: Directs airflow from both grille inlet ducts without obstruction. The air guide seals against the hood, creating a clean passage into the 120mm filter inlet, maximizing ram air effect and reducing turbulence.
  • Reverse Mounted, Washable 120mm (4.7″) Dry Cotton Filter: Featuring a large-diameter inlet, this filter minimizes airflow resistance, ensuring a smooth and substantial flow of air. The outlet is specifically shaped to optimize air exit.
  • 100mm (4″) Outlet with Heat Shield: Housed in a powder-coated aluminum casing, the air filter is protected from engine bay heat, maintaining a cool airflow. The 100mm outlet provides a high-volume passage for uninterrupted airflow.
  • 100mm to 76mm (4″ to 3″) Turbo Inlet Hose: This 4-ply, wire-reinforced silicone hose tapers from 100mm at the inlet to 76mm at the outlet, ensuring minimal turbulence. The silicone also acts as a heat insulator, improving airflow efficiency.
  • Large Diameter Flanges for Turbo Compatibility: The 76mm (3″) outlet accommodates a large inlet flange, allowing the system to be compatible with various turbocharger setups. The design eliminates restrictive elbows, maximizing airflow to the turbo.
Specs & compatibility
The Blaze Performance Turbo Inlet System is compatible with the following turbochargers:
  • Garrett IS12/20/38/Vortex Standard
  • Garrett IS38 Hybrid (Vortex XL, TTE, Littco, CTS, LM series)
  • Garrett Power MAX (Stages 1 & 2) – via 2-bolt flange
  • APR DTR6054, TPC, RAC, Mabo – via 3-bolt flange
  • EQT Typhoon & 660/CTS BOSS 700 – direct coupling to turbo
  • 100mm (4″) Outlet: Powder-coated, closed aluminum casing
  • 120mm (4.7″) Dry Cotton Filter: Reusable and washable for long-term use
  • 4-Ply Silicone Turbo Inlet Hose: Steel-reinforced for durability
  • Multiple Turbo Fitment Options: Compatible with stock, hybrid, and big turbos
  • Stainless Steel Clamps and VITON O-Ring Seal
  • Bolt-on Fitment: Easy installation for both LHD and RHD models
Frequently asked questions

Will this intake fit my car?

This kit is designed and validated for the vehicles listed in the “Fits these vehicles” box above. If your year, model and engine code match, it is a direct-fit installation. If you are unsure, email sales@blazeperformance.com with your VIN and we will confirm fitment.

Do I need a tune (remap) to run this intake?

No — the kit is designed to work safely on a stock ECU map. You will get airflow and intake-note gains either way. If you are already running a Stage 1 or higher tune, this intake is fully compatible.

Is the install reversible?

Yes. The kit bolts on using the existing OEM mounting points and the original airbox can be re-installed at any time. There is no cutting, drilling or permanent modification.

Off-road or street legal?

Blaze Performance products are sold for closed-course, off-road and motorsport competition use. Local regulations on emissions and intake modifications vary by country — please check your local laws before fitting to a road-registered vehicle.

The post VW Mk7/Mk7.5 GTI/R / Audi S3 8V – AToM Race V2 100mm Cold Air Intake (EA888.3) appeared first on Blaze Performance.

]]> VW MQB EA888 Gen 3 – R600 Upgrade Kit 100mm (4″) | Golf 7 GTI/R / Audi S3 8V https://blaze-performance.com/product/vag-mqb-ea888-r600-upgrade-kit-100mm-4/ Fri, 08 Dec 2023 12:22:15 +0000 https://blaze-performance.com/?post_type=product&p=3204 R600 4-inch (100 mm) intake upgrade kit for MQB EA888 Gen 3 2.0 TSI. Direct fit, no tune required. Full vehicle list and specs in the description below.

The post VW MQB EA888 Gen 3 – R600 Upgrade Kit 100mm (4″) | Golf 7 GTI/R / Audi S3 8V appeared first on Blaze Performance.

]]> Vehicle fitment guide

VW

  • Golf 7 / 7.5 R (2013-2020)
  • Golf 7 / 7.5 GTI & Clubsport (2013-2020)
  • Golf 7 / 7.5 1.8 TSI (2013-2020)
  • Passat B8 2.0 TSI (2015+)
  • Arteon 2.0 TSI (2017-2020)
  • T-Roc 2.0 TSI (2017-2022)
  • Tiguan II 2.0 TSI (2016-2020)
  • Jetta / GLI Mk7 (2018+)

Audi

  • S3 8V (2013-2020)
  • A3 2.0 / 1.8 TSI 8V (2013-2020)
  • TT Mk3 8S (2014+)
  • TTS 2.0 TFSI 8S (2015-2021)
  • TT 2.0 TFSI 8S (2014+)
  • SQ2 (2018+)
  • Q3 45 TFSI 2.0 TSI (2018+)

Cupra / SEAT

  • SEAT Leon III Cupra 5F (2014-2020)
  • SEAT Leon III 1.8 TSI 5F (2014-2020)
  • Cupra Ateca (2018+)
  • SEAT Tarraco 2.0 TSI (2018+)

Skoda

  • Octavia III vRS 2.0 TSI 5E (2014-2020)
  • Superb III 1.8 / 2.0 TSI 3V (2015+)

Engine platform: MQB EA888 Gen 3 only (EA888.3)  |  Inlet: 100 mm (4″)

⚠ Will NOT fit — these are MQB Evo / EA888.4 (newer chassis)

  • VW Tiguan II 245ps facelift (2021+)

For these newer chassis, see the AToM R8CE V2 range.


Mk8 R / 8Y S3 / Cupra Leon Mk4 / Arteon R / Tiguan R 320ps / TTS EA888.4? Those run the EA888.4 evo4 engine — see our AToM R8CE intake instead.

Mk8 / Mk8.5 GTI? Use our dedicated AToM V2 Mk8 GTI intake (EA888 evo4, Garrett turbo).
Mk8 R / 8Y S3 / EA888.4 evo4? See our AToM R8CE intake.
About this kit

The R600 Upgrade Kit converts the OEM EA888 Gen 3 airbox to a 100 mm (4″) high-flow induction system, matching the airflow capacity of the Blaze AToM RACE V2 and the Racingline R600 intakes. Designed as a more affordable upgrade path for owners who want R600-level airflow without replacing the entire airbox assembly. Direct-fit using OEM mounting points.

Frequently asked questions

Will this intake fit my car?

This kit is designed and validated for the vehicles listed in the “Fits these vehicles” box above. If your year, model and engine code match, it is a direct-fit installation. If you are unsure, email sales@blazeperformance.com with your VIN and we will confirm fitment.

Do I need a tune (remap) to run this intake?

No — the kit is designed to work safely on a stock ECU map. You will get airflow and intake-note gains either way. If you are already running a Stage 1 or higher tune, this intake is fully compatible.

Is the install reversible?

Yes. The kit bolts on using the existing OEM mounting points and the original airbox can be re-installed at any time. There is no cutting, drilling or permanent modification.

Off-road or street legal?

Blaze Performance products are sold for closed-course, off-road and motorsport competition use. Local regulations on emissions and intake modifications vary by country — please check your local laws before fitting to a road-registered vehicle.

The post VW MQB EA888 Gen 3 – R600 Upgrade Kit 100mm (4″) | Golf 7 GTI/R / Audi S3 8V appeared first on Blaze Performance.

]]> VW MQB EA888 Gen 3 Turbo Inlet Pipe 100mm (4″) – Golf 7 GTI/R / Audi S3 8V https://blaze-performance.com/product/vag-mqb-ea888-turbo-inlet-pipe-100mm-4/ Fri, 08 Dec 2023 09:48:19 +0000 https://blaze-performance.com/?post_type=product&p=3168 100 mm (4″) turbo inlet pipe for MQB EA888 Gen 3 (1.8 / 2.0 TSI). Direct replacement for the OEM elbow. Full vehicle list and specs in the description below.

The post VW MQB EA888 Gen 3 Turbo Inlet Pipe 100mm (4″) – Golf 7 GTI/R / Audi S3 8V appeared first on Blaze Performance.

]]> Vehicle fitment guide VW
  • Golf 7 / 7.5 R (2013-2020)
  • Golf 7 / 7.5 GTI & Clubsport (2013-2020)
  • Golf 7 / 7.5 1.8 TSI (2013-2020)
  • Passat B8 2.0 TSI (2015+)
  • Arteon 2.0 TSI (2017-2020)
  • T-Roc 2.0 TSI (2017-2022)
  • Tiguan II 2.0 TSI (2016-2020)
  • Tiguan II 2.0 TSI 245ps (2021+)
  • Jetta / GLI Mk7 (2018+)
Audi
  • S3 8V (2013-2020)
  • A3 2.0 / 1.8 TSI 8V (2013-2020)
  • TT Mk3 8S (2014+)
  • TTS 2.0 TFSI 8S (2015-2021)
  • TT 2.0 TFSI 8S (2014+)
  • SQ2 (2018+)
  • Q3 45 TFSI 2.0 TSI (2018+)
Cupra / SEAT
  • SEAT Leon III Cupra 5F (2014-2020)
  • SEAT Leon III 1.8 TSI 5F (2014-2020)
  • Cupra Ateca (2018+)
  • SEAT Tarraco 2.0 TSI (2018+)
Skoda
  • Octavia III vRS 2.0 TSI 5E (2014-2020)
  • Superb III 1.8 / 2.0 TSI 3V (2015+)
Engine platform: MQB EA888 Gen 3 (1.8 & 2.0 TSI)  |  Inlet: 100 mm (4″) Mk8 / Mk8.5 GTI? Use our dedicated AToM V2 Mk8 GTI intake (EA888 evo4, Garrett turbo). Mk8 R / 8Y S3 / EA888.4 evo4? See our AToM R8CE intake.
About this kit
Features:
  • Fits VAG MQB EA888 Vehicles – Bolt-on Fitment
  • Improved turbo spool, torque, and power
  • 100mm (4inch) Turbo Inlet Hose
  • Billet Couplings
Specifications:
  • Constructed from 4 Ply Silicone, steel-reinforced, Turbo Inlet Hose
  • Billet aluminium PCV Couplings
  • 56mm Internal Diameter Turbo inlet flange
  • Stainless steel clamps
Vehicle Fitment Guide: Left Hand Drive and RIght Hand Drive Vehicles:
  • VW Golf 7 & 7.5 GTI & Clubsport 2013+ 5G | VW Golf 7 & 7.5R 2013+ 5G | VW Golf 7 & 7.5 1.8 TSI 2013+ 5G | VW Passat 2.0 TSI B8 2015+ 3G | VW Arteon 2.0 TSI 2017+ | VW T-Roc R 2.0 TSI 2019+ | Audi A3 2.0 TSI / 1.8 TSI 2013+ 8V | Audi S3 2013+ 8V
  • Audi TT 2.0 TSI III 2014+ 8S | Audi SQ2 2018+ | Audi Q3 45TFSI 2.0 TSI 2018+ | SEAT Leon Cupra III 2014+ 5F | SEAT Leon 1.8 TSI 2014+ 5F | SEAT Ateca Cupra 2.0 TSI 2018+ | Skoda Octavia vRS III 2014+ 5E |Skoda Superb III 1.8 / 2.0 TSI 2015+ B8 3
Frequently asked questions

What does a turbo inlet pipe do?

It replaces the OEM intake elbow that connects the air filter to the turbo inlet. The OEM part has restrictive internal geometry and a fixed cross-section. The Blaze inlet pipe is smoother, larger-diameter (76mm or 100mm depending on the model), and reduces airflow turbulence into the turbo.

76mm or 100mm — which should I choose?

The 76mm (3-inch) inlet is a direct upgrade for OEM and pairs well with the AToM PRO intake. The 100mm (4-inch) inlet supports higher airflow and is recommended for the AToM RACE intake or for higher-power builds. The two are not interchangeable — pick to match your intake.

Will this fit my car?

See the “Fits these vehicles” box above. The inlet pipe is a direct replacement for the OEM elbow on MQB EA888 Gen 3 cars.

Do I need a tune?

No — the inlet pipe is safe on a stock ECU. It is most commonly fitted alongside a cold air intake and/or charge pipe upgrade.

The post VW MQB EA888 Gen 3 Turbo Inlet Pipe 100mm (4″) – Golf 7 GTI/R / Audi S3 8V appeared first on Blaze Performance.

]]> VW MQB EA888 Gen 3 Turbo Inlet Pipe 76mm (3″) – Golf 7 GTI/R / Audi S3 8V https://blaze-performance.com/product/vag-mqb-ea888-turbo-inlet-pipe-76mm-3inch/ Thu, 07 Dec 2023 12:12:08 +0000 https://blaze-performance.com/?post_type=product&p=2998 76 mm (3″) turbo inlet pipe for MQB EA888 Gen 3 (1.8 / 2.0 TSI). Direct replacement for the OEM elbow. Full vehicle list and specs in the description below.

The post VW MQB EA888 Gen 3 Turbo Inlet Pipe 76mm (3″) – Golf 7 GTI/R / Audi S3 8V appeared first on Blaze Performance.

]]> Vehicle fitment guide VW
  • Golf 7 / 7.5 R (2013-2020)
  • Golf 7 / 7.5 GTI & Clubsport (2013-2020)
  • Golf 7 / 7.5 1.8 TSI (2013-2020)
  • Passat B8 2.0 TSI (2015+)
  • Arteon 2.0 TSI (2017-2020)
  • T-Roc 2.0 TSI (2017-2022)
  • Tiguan II 2.0 TSI (2016-2020)
  • Tiguan II 2.0 TSI 245ps (2021+)
  • Jetta / GLI Mk7 (2018+)
Audi
  • S3 8V (2013-2020)
  • A3 2.0 / 1.8 TSI 8V (2013-2020)
  • TT Mk3 8S (2014+)
  • TTS 2.0 TFSI 8S (2015-2021)
  • TT 2.0 TFSI 8S (2014+)
  • SQ2 (2018+)
  • Q3 45 TFSI 2.0 TSI (2018+)
Cupra / SEAT
  • SEAT Leon III Cupra 5F (2014-2020)
  • SEAT Leon III 1.8 TSI 5F (2014-2020)
  • Cupra Ateca (2018+)
  • SEAT Tarraco 2.0 TSI (2018+)
Skoda
  • Octavia III vRS 2.0 TSI 5E (2014-2020)
  • Superb III 1.8 / 2.0 TSI 3V (2015+)
Engine platform: MQB EA888 Gen 3 (1.8 & 2.0 TSI)  |  Inlet: 76 mm (3″) Mk8 / Mk8.5 GTI? Use our dedicated AToM V2 Mk8 GTI intake (EA888 evo4, Garrett turbo). Mk8 R / 8Y S3 / EA888.4 evo4? See our AToM R8CE intake.
About this kit
Features:
  • Fits VAG MQB EA888 Vehicles – Bolt-on Fitment
  • Improved turbo spool, torque, and power
  • 76mm (3inch) Turbo Inlet Hose
  • Billet Couplings
Specifications:
  • Constructed from 4 Ply Silicone, steel-reinforced, Turbo Inlet Hose
  • Billet aluminium PCV Couplings
  • 56mm Internal Diameter Turbo inlet flange
  • Stainless steel clamps
Vehicle Fitment Guide: Left and Right Hand Drive Vehicles:
  • VW Golf 7 & 7.5 GTI & Clubsport 2013+ 5G | VW Golf 7 & 7.5R 2013+ 5G | VW Golf 7 & 7.5 1.8 TSI 2013+ 5G | VW Passat 2.0 TSI B8 2015+ 3G | VW Arteon 2.0 TSI 2017+ | VW T-Roc R 2.0 TSI 2019+ | Audi A3 2.0 TSI / 1.8 TSI 2013+ 8V | Audi S3 2013+ 8V
  • Audi TT 2.0 TSI III 2014+ 8S | Audi SQ2 2018+ | Audi Q3 45TFSI 2.0 TSI 2018+ | SEAT Leon Cupra III 2014+ 5F | SEAT Leon 1.8 TSI 2014+ 5F | SEAT Ateca Cupra 2.0 TSI 2018+ | Skoda Octavia vRS III 2014+ 5E |Skoda Superb III 1.8 / 2.0 TSI 2015+ B8 3V
Frequently asked questions

What does a turbo inlet pipe do?

It replaces the OEM intake elbow that connects the air filter to the turbo inlet. The OEM part has restrictive internal geometry and a fixed cross-section. The Blaze inlet pipe is smoother, larger-diameter (76mm or 100mm depending on the model), and reduces airflow turbulence into the turbo.

76mm or 100mm — which should I choose?

The 76mm (3-inch) inlet is a direct upgrade for OEM and pairs well with the AToM PRO intake. The 100mm (4-inch) inlet supports higher airflow and is recommended for the AToM RACE intake or for higher-power builds. The two are not interchangeable — pick to match your intake.

Will this fit my car?

See the “Fits these vehicles” box above. The inlet pipe is a direct replacement for the OEM elbow on MQB EA888 Gen 3 cars.

Do I need a tune?

No — the inlet pipe is safe on a stock ECU. It is most commonly fitted alongside a cold air intake and/or charge pipe upgrade.

The post VW MQB EA888 Gen 3 Turbo Inlet Pipe 76mm (3″) – Golf 7 GTI/R / Audi S3 8V appeared first on Blaze Performance.

]]> R600 Replacement Air Filter 100mm (4″) https://blaze-performance.com/product/r600-4-inch-filter-100mm-4/ Thu, 07 Dec 2023 11:59:07 +0000 https://blaze-performance.com/?post_type=product&p=2997 Replacement R600 4-inch (100 mm) high-flow filter for MQB EA888 Gen 3 intake systems. Direct swap, no modifications required. Full vehicle list and specs in the description below.

The post R600 Replacement Air Filter 100mm (4″) appeared first on Blaze Performance.

]]> Vehicle fitment guide

Service / replacement filter — fits these kits

A 100 mm (4″) high-flow dry cotton filter sold as a direct service replacement. It will fit any 100 mm intake pipe — Blaze, Racingline R600, or any other 4-inch system.

Blaze kits this filter fits:

Filter spec: 4″ (100 mm) inlet, dry cotton, washable and reusable.

Also fits: any third-party 100 mm intake or turbo inlet pipe (e.g. Racingline R600). If your intake is not 100 mm, this filter will not fit — check the inlet diameter on your existing pipe before ordering.

About this kit
Features:
  • Fits VAG MQB EA888 Racingline R600 Induction Kit
  • 100mm (4inch) dry cotton filter allows greater airflow
  • Increased power and torque.
Specifications:
  • Dry Cotton Filter with 100mm (4 Inch) outlet.
  • Stainless steel clamps
Vehicle Fitment Guide: 100mm (4″) Turbo Inlet Pipe Required:
  • VW Golf 7 & 7.5 GTI & Clubsport 2013+ 5G | VW Golf 7 & 7.5R 2013+ 5G | VW Golf 7 & 7.5 1.8 TSI 2013+ 5G | VW Passat 2.0 TSI B8 2015+ 3G | VW Arteon 2.0 TSI 2017+ | VW T-Roc R 2.0 TSI 2019+ | Audi A3 2.0 TSI / 1.8 TSI 2013+ 8V | Audi S3 2013+ 8V
  • Audi TT 2.0 TSI III 2014+ 8S | Audi SQ2 2018+ | Audi Q3 45TFSI >2.02018+ | SEAT Leon Cupra III 2014+ 5F | SEAT Leon 1.8 TSI 2014+ 5F | SEAT Ateca Cupra 2.0 TSI 2018+ | Skoda Octavia vRS III 2014+ 5E |Skoda Superb III 1.8 / 2.0 TSI 2015+ B8 3V
Frequently asked questions

Which intake kits does this filter fit?

See the “Fits these vehicles” box above for compatibility. This is a direct-swap replacement filter element designed to fit specific Blaze AToM intake kits — no modifications needed.

How often should I replace the filter?

In normal road use, inspect the filter every 10,000–15,000 km and clean or replace if visibly dirty. In dusty environments or track use, inspect more frequently. The filter is washable cotton — refer to the cleaning kit instructions if you choose to clean rather than replace.

Can I install the filter myself?

Yes. The replacement takes a few minutes — remove the old filter element from the intake housing and slot in the new one. No tools required beyond what is needed to access the intake.

The post R600 Replacement Air Filter 100mm (4″) appeared first on Blaze Performance.

]]>