VW / Audi 1.2 & 1.4 TSI (MQB EA211) – AToM Pro Intake System
$350.00
Cold air intake for VAG 1.4 TSI (EA211 / EA111). 76 mm (3″) inlet. Direct fit, no tune required. Full vehicle list and specs in the description below.
- Description
- Additional information
Description
Vehicle fitment guide
VW
- Golf Mk7 / Mk7.5 (5G / BA5) — 2013-2020 — 1.2 / 1.4 TSI
- Golf Sportsvan / SV (AM1) — 2014-2020 — 1.2 / 1.4 TSI
- Passat B8 (3G) — 2015-2021 — 1.4 TSI
- Touran (5T) — 2015-2022 — 1.2 / 1.4 TSI
- Tiguan AD1 (Mk2) — 2016-2021 — 1.4 TSI
Audi
- A3 / S-Line (8V) — 2013-2020 — 1.2 / 1.4 TFSI
- Q2 (GA) — 2016-2021 — 1.4 TFSI
- Q3 F3 (Mk2) — 2018-2021 — 1.4 TFSI (35 TFSI)
SEAT
- Leon Mk3 (5F) — 2013-2020 — 1.2 / 1.4 TSI
- Ateca (KH7) — 2016-2020 — 1.4 TSI
Skoda
- Octavia Mk3 (5E) — 2013-2020 — 1.2 / 1.4 TSI
- Superb Mk3 (3V) — 2015-2020 — 1.4 TSI
- Karoq (NU7) — 2017-2020 — 1.4 TSI
- Kodiaq (NS7) — 2016-2021 — 1.4 TSI
Engine platform: VAG 1.4 TSI EA211 (single turbo) | Inlet: 76 mm (3″)
⚠ Important — will NOT fit these:
- 1.5 TSI Evo (introduced 2017/2018+ on certain models) — revised turbo layout and different breather pipe diameters.
- VW Polo Mk5/Mk6 and Audi A1, even with the 1.2T or 1.4T engine — shorter engine bay, scoop attachment points don’t align. (For Polo GTI 6R, see our AToM CAVE.)
- Twincharged 1.4 TSI EA111 (Mk6 Golf, older Jetta — supercharger + turbo) — different engine family.
About this kit
- 76mm(34″) outlet, powder-coated closed aluminium casing
- Washable, reusable 120mm (4inch) dry cotton filter
- 76mm (3inch) Turbo Inlet Hose
- Billet fittings
- Improved turbo spool, torque, and power
- Bolt-on fitment
- 120mm Dry Cotton Filter.
- 4 Ply Silicone, steel-reinforced, Turbo Inlet Hose
- Stainless steel clamps
- VW Golf 7 & 7.5 1.4TSi 2013+ 5G | Audi A3 1.4 TSI 2013+ 8V
Frequently asked questions
Will this intake fit my car?
This kit is designed and validated for the vehicles listed in the “Fits these vehicles” box above. If your year, model and engine code match, it is a direct-fit installation. If you are unsure, email sales@blazeperformance.com with your VIN and we will confirm fitment.
Do I need a tune (remap) to run this intake?
No — the kit is designed to work safely on a stock ECU map. You will get airflow and intake-note gains either way. If you are already running a Stage 1 or higher tune, this intake is fully compatible.
Is the install reversible?
Yes. The kit bolts on using the existing OEM mounting points and the original airbox can be re-installed at any time. There is no cutting, drilling or permanent modification.
Off-road or street legal?
Blaze Performance products are sold for closed-course, off-road and motorsport competition use. Local regulations on emissions and intake modifications vary by country — please check your local laws before fitting to a road-registered vehicle.
Additional information
| Weight | 3 kg |
|---|---|
| Dimensions | 42 × 32 × 22 cm |
| Brand |