TT Series Archives - Blaze Performance https://blaze-performance.com/product-category/audi/tt-series/ Thu, 17 Sep 2026 09:02:02 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.1 https://blaze-performance.com/wp-content/uploads/2025/01/cropped-Social-Logo-32x32.jpg TT Series Archives - Blaze Performance https://blaze-performance.com/product-category/audi/tt-series/ 32 32 Blaze EA855 EVO2 Downpipe + Midpipe — Audi RS3 8V.1 | TTRS 8S | DAZA 2.5 TFSI https://blaze-performance.com/product/blaze-ea855-evo2-downpipe-midpipe-rs3-8v-ttrs-8s/ Wed, 27 May 2026 09:54:02 +0000 https://blaze-performance.com/?post_type=product&p=4300 Catless stainless downpipe + midpipe complete assembly for the Audi RS3 8V.1 and TTRS 8S 2.5 TFSI EVO2 (DAZA engine). Direct OEM bolt-on with integrated heat shield. Tune required. Off-road / race use only. NOT for facelift RS3 8V.2 or 8Y (DNWA). Full fitment + specs below.

The post Blaze EA855 EVO2 Downpipe + Midpipe — Audi RS3 8V.1 | TTRS 8S | DAZA 2.5 TFSI appeared first on Blaze Performance.

]]> Vehicle fitment guide

Fits Audi RS3 8V.1 and TTRS 8S with the 2.5 TFSI EVO2 (EA855 DAZA) engine, pre-facelift cars 2017+.

Confirmed fitment:

  • Audi RS3 8V.1 Sportback (8V0) 2017–2020 — 2.5 TFSI EVO2 (DAZA)
  • Audi RS3 8V.1 Sedan (8VS) 2017–2020 — 2.5 TFSI EVO2 (DAZA)
  • Audi TTRS 8S 2017+ — 2.5 TFSI EVO2 (DAZA)

Engine platform: EA855 EVO2 2.5 TFSI — engine code DAZA  |  Includes: downpipe + midpipe assembly with heat shield

RS3 8V.2 facelift (2020–2022) or 8Y (2022+)? Those use the newer DNWA engine variant — not compatible with this DAZA-specific downpipe. We’re working on coverage for those platforms.

About this downpipe

The Blaze RS3 / TTRS downpipe + midpipe assembly replaces the restrictive factory exhaust front section on every DAZA-coded RS3 8V.1 and TTRS 8S. The factory unit’s pre-cat and primary cat severely choke the 5-cylinder’s distinctive sound and exhaust flow.

Two-piece downpipe + midpipe construction in stainless steel with integrated heat shield. OEM flange geometry at the turbo end and the cat-back end — direct bolt-on with no fabrication.

Tune required. Without a tune the car will throw a check engine light. Any major Audi 2.5 TFSI tuner (APR, Unitronic, MRC Tuning, IE, Revo) clears the code and unlocks full benefit.

Key features
  • Downpipe + midpipe complete assembly (two pieces)
  • Stainless steel construction with TIG welds
  • Integrated heat shield for engine-bay thermal management
  • OEM flanges — direct bolt-on at turbo and cat-back
  • Catless / off-road configuration
  • Unlocks the distinctive 5-cylinder soundtrack the EA855 is famous for
Specs & compatibility
  • Material: Stainless steel
  • Cat configuration: Catless (off-road / race use)
  • Construction: TIG-welded, includes heat shield
  • Engine: EA855 EVO2 2.5 TFSI (DAZA code)
  • Configuration: Downpipe + midpipe complete assembly
  • Tune: Required (APR, Unitronic, MRC, IE, Revo, etc.)

Off-road / race use only. Not intended for road use in jurisdictions with emissions compliance requirements. Buyer is responsible for ensuring legal compliance with local regulations.

Frequently asked questions

How do I know if I have the DAZA engine?
DAZA is the engine code for the 2017–2020 RS3 8V.1 (pre-facelift) and 2017+ TTRS 8S. The engine code is stamped on the cam cover and listed in your VIN decode under engine designation. If you have a 2020.5+ RS3 with the 8V.2 facelift body, you likely have the newer DNWA engine and this part won’t fit.

Does it fit my RS3 8Y or facelift 8V.2?
No — both use the newer DNWA engine which has different exhaust routing.

Do I need a tune?
Yes — without a tune, the missing cats trigger a CEL. Any major Audi 2.5 TFSI tuner (APR, Unitronic, MRC Tuning, IE, Revo) clears it.

What’s in the box?
The downpipe, the midpipe, integrated heat shield, OEM-spec gaskets, and mounting hardware.

Is this legal on public roads?
This is a catless off-road / race exhaust. Road-legality depends on your country and local emissions requirements. Buyer is responsible for confirming legal use in their jurisdiction.

The post Blaze EA855 EVO2 Downpipe + Midpipe — Audi RS3 8V.1 | TTRS 8S | DAZA 2.5 TFSI appeared first on Blaze Performance.

]]> Blaze MQB EA888 Gen 3 Downpipe — VW Golf R Mk7 / Mk7.5 | Audi S3 8V | TT/TTS 8S https://blaze-performance.com/product/blaze-mqb-ea888-gen3-downpipe-golf-r-mk7/ Wed, 27 May 2026 09:52:08 +0000 https://blaze-performance.com/?post_type=product&p=4298 Catless stainless steel downpipe with integrated heat shield for MQB EA888 Gen 3 with IS38 turbo. Fits VW Golf R Mk7/Mk7.5, Audi S3 8V, TT/TTS 8S. Direct OEM bolt-on. Tune required. Off-road / race use only. Full fitment + specs below.

The post Blaze MQB EA888 Gen 3 Downpipe — VW Golf R Mk7 / Mk7.5 | Audi S3 8V | TT/TTS 8S appeared first on Blaze Performance.

]]> Vehicle fitment guide

Fits Volkswagen Golf R Mk7 / Mk7.5 — 2.0 TSI EA888 Gen 3 with IS38 turbo and factory downpipe geometry.

Confirmed fitment:

  • VW Golf R Mk7 (5G) 2014–2017 — 2.0 TSI EA888 Gen 3
  • VW Golf R Mk7.5 (5G facelift) 2017–2020 — 2.0 TSI EA888 Gen 3
  • Audi S3 8V Sportback / Sedan 2013–2020 — 2.0 TSI EA888 Gen 3
  • Audi TT 2.0 TFSI 8S 2014+ — 2.0 TSI EA888 Gen 3
  • Audi TTS 8S 2014–2021 — 2.0 TSI EA888 Gen 3

Engine platform: MQB EA888 Gen 3 with IS38 turbo (factory or hybrid)  |  Includes: heat shield

Mk8 GTI / Mk8 R / 8Y S3? Different engine (EA888 evo4) and turbo packaging — see our dedicated Mk8 R / 8Y S3 range.

About this downpipe

The Blaze Golf R / S3 8V downpipe replaces the restrictive factory downpipe + catalytic converter on every MQB EA888 Gen 3 platform car running the IS38 turbo. Free-flowing stainless construction with a bolt-on heat shield for engine-bay management.

Direct OEM fit to factory turbo and factory midpipe — no fabrication required. Includes integrated heat shield to protect surrounding components from the higher exhaust temperatures of a catless setup.

Tune required. The car will run on stock ECU but will throw a check engine light without a tune. Any major MQB tuner (APR, Unitronic, Revo, Cobb, etc.) clears the code and unlocks the full benefit.

Key features
  • Stainless steel construction with TIG welds throughout
  • Integrated heat shield for engine-bay thermal management
  • OEM turbo flange — direct bolt-on to factory IS38 turbo
  • OEM midpipe flange — bolts to factory exhaust, no other mods required
  • Catless / off-road configuration
  • Compatible with stock IS38 and most hybrid IS38 turbo upgrades (Vortex XL, TTE, Littco, CTS, LM series)
Specs & compatibility
  • Material: Stainless steel
  • Cat configuration: Catless (off-road / race use)
  • Construction: TIG-welded, includes heat shield
  • Engine: MQB EA888 Gen 3 2.0 TSI
  • Turbo compatibility: IS38 (factory + most hybrid upgrades)
  • Tune: Required (APR, Unitronic, Revo, Cobb, etc.)

Off-road / race use only. Not intended for road use in jurisdictions with emissions compliance requirements. Buyer is responsible for ensuring legal compliance with local regulations.

Frequently asked questions

Does it fit my Audi S3 8V?
Yes. The S3 8V shares the same MQB platform, EA888 Gen 3 engine, and IS38 turbo as the Golf R Mk7/7.5. Direct bolt-on.

Will it fit my Mk8 Golf R or 8Y Audi S3?
No. Those cars use the EA888 evo4 with different turbo packaging. See our dedicated Mk8 R / 8Y S3 range.

Do I need a tune?
Yes — without a tune, the missing upstream cat triggers a CEL. Any major MQB tuner (APR, Unitronic, Revo, Cobb) clears it.

What’s in the box?
The downpipe, integrated heat shield, OEM-spec gaskets, and mounting hardware.

Is this legal on public roads?
This is a catless off-road / race downpipe. Road-legality depends on your country and local emissions requirements. Buyer is responsible for confirming legal use in their jurisdiction.

The post Blaze MQB EA888 Gen 3 Downpipe — VW Golf R Mk7 / Mk7.5 | Audi S3 8V | TT/TTS 8S appeared first on Blaze Performance.

]]> VAG MQB EA888 Turbo Flanges https://blaze-performance.com/product/vag-mqb-ea888-turbo-flanges/ Thu, 12 Dec 2024 04:41:23 +0000 https://blaze-performance.com/?post_type=product&p=3748 Precision turbo flanges for MQB EA888 Gen 3 (1.8 / 2.0 TSI). Replacement and fabrication components for workshop builds. Full vehicle list and specs in the description below.

The post VAG MQB EA888 Turbo Flanges appeared first on Blaze Performance.

]]> Vehicle fitment guide

What this is — turbo-swap accessory

These are precision turbo flanges sold as an accessory for the AToM RACE V2 induction kit. They are intended for builders who are upgrading the turbocharger on a Blaze AToM RACE V2 installation, where the new turbo’s inlet geometry requires re-mating the existing intake system.

Use case: EA888 Gen 3 turbo upgrade on a car already running (or being built around) the AToM RACE V2 100 mm intake.

Compatible kit:

Vehicle platform (inherits from RACE V2): any car running an MQB EA888 Gen 3 (1.8 / 2.0 TSI) on the RACE V2 fitment list, undergoing a turbocharger upgrade.

⚠ Not a bolt-on consumer upgrade

These flanges are fabrication / build components. They are intended for workshops, tuners and experienced builders fitting an aftermarket turbo to an existing AToM RACE V2 setup. If you are unsure whether your build needs them, email sales@blazeperformance.com with your turbo specs before ordering.

About this kit
Features:
  • CNC Machined Billet Turbo Couplings
  • Turbo Specific Flanges
Specifications:
       Suitable for
  • Garrett IS12/20/38
  • Garrett IS38 Hybrid (Vortex XL, TTE, Littco, CTS, LM series) (56mm Internal Diameter)
  • Garrett Power MAX (Stages 1 & 2) – via 2-bolt flange
  • APR DTR6054, TPC, RAC, Mabo – via 3-bolt flange
Vehicle Fitment Guide: Left and Right Hand Drive Vehicles:
  • VW Golf 7 & 7.5 GTI & Clubsport 2013+ 5G | VW Golf 7 & 7.5R 2013+ 5G | VW Golf 7 & 7.5 1.8 TSI 2013+ 5G | VW Passat 2.0 TSI B8 2015+ 3G | VW Arteon 2.0 TSI 2017+ | VW T-Roc R 2.0 TSI 2019+ | Audi A3 2.0 TSI / 1.8 TSI 2013+ 8V | Audi S3 2013+ 8V
  • Audi TT 2.0 TSI III 2014+ 8S | Audi SQ2 2018+ | Audi Q3 45TFSI 2.0 TSI 2018+ | SEAT Leon Cupra III 2014+ 5F | SEAT Leon 1.8 TSI 2014+ 5F | SEAT Ateca Cupra 2.0 TSI 2018+ | Skoda Octavia vRS III 2014+ 5E |Skoda Superb III 1.8 / 2.0 TSI 2015+ B8 3V
Frequently asked questions

What are these turbo flanges for?

They are precision-machined replacement flanges used in turbo, downpipe and intake fabrication on MQB EA888 Gen 3 platforms. Most buyers are workshops, fabricators or tuners building custom turbo or exhaust solutions.

Will these flanges fit my application?

They are dimensionally matched to OEM EA888 Gen 3 1.8 and 2.0 TSI mounting patterns. See the “Fits these vehicles” box above for the engine platforms they support. If you are fabricating for a non-listed application, contact us with the specifications.

Are these for end-user installation?

These flanges are intended as fabrication components, not a bolt-on consumer upgrade. They are best handled by a workshop with welding and turbo-fitting experience.

The post VAG MQB EA888 Turbo Flanges appeared first on Blaze Performance.

]]> VW Mk7/Mk7.5 GTI/R / Audi S3 8V – AToM Race V2 Carbon Cold Air Intake (EA888.3) https://blaze-performance.com/product/vag-mqb-ea888-3-atom-race-carbon-100mm-4-full-induction-kit/ Thu, 12 Dec 2024 03:26:26 +0000 https://blaze-performance.com/?post_type=product&p=3732 Carbon-finished race-spec cold air intake for MQB EA888 Gen 3 2.0 TSI. 100 mm (4″) inlet, direct fit, no tune required. Full vehicle list and specs in the description below.

The post VW Mk7/Mk7.5 GTI/R / Audi S3 8V – AToM Race V2 Carbon Cold Air Intake (EA888.3) appeared first on Blaze Performance.

]]> Vehicle fitment guide VW
  • Golf 7 / 7.5 R (2013-2020)
  • Golf 7 / 7.5 GTI & Clubsport (2013-2020)
  • Golf 7 / 7.5 1.8 TSI (2013-2020)
  • Passat B8 2.0 TSI (2015+)
  • Arteon 2.0 TSI (2017-2020)
  • T-Roc 2.0 TSI (2017-2022)
  • Tiguan II 2.0 TSI (2016-2020)
  • Tiguan II 2.0 TSI 245ps (2021+)
  • Jetta / GLI Mk7 (2018+)
Audi
  • S3 8V (2013-2020)
  • A3 2.0 / 1.8 TSI 8V (2013-2020)
  • TT Mk3 8S (2014+)
  • TTS 2.0 TFSI 8S (2015-2021)
  • TT 2.0 TFSI 8S (2014+)
  • SQ2 (2018+)
  • Q3 45 TFSI 2.0 TSI (2018+)
Cupra / SEAT
  • SEAT Leon III Cupra 5F (2014-2020)
  • SEAT Leon III 1.8 TSI 5F (2014-2020)
  • Cupra Ateca (2018+)
  • SEAT Tarraco 2.0 TSI (2018+)
Skoda
  • Octavia III vRS 2.0 TSI 5E (2014-2020)
  • Superb III 1.8 / 2.0 TSI 3V (2015+)
Engine platform: MQB EA888 Gen 3 (1.8 & 2.0 TSI)  |  Inlet: 100 mm (4″) — carbon finish Mk8 / Mk8.5 GTI? This kit fits Mk7 (EA888 Gen 3) only. The Mk8 GTI uses the EA888 evo4 with a Garrett turbo and needs our dedicated AToM V2 Mk8 GTI intake. Mk8 R / 8Y S3 / Cupra Leon Mk4 / Arteon R / Tiguan R 320ps / TTS EA888.4? Those run the EA888.4 evo4 engine — see our AToM R8CE intake instead.
The Blaze Performance Turbo Inlet System fits the following models:
  • Volkswagen:
    • Golf 7 & 7.5 GTI & Clubsport (2013+ 5G)
    • Golf 7 & 7.5 R (2013+ 5G)
    • Golf 7 & 7.5 1.8 TSI (2013+ 5G)
    • Passat 2.0 TSI B8 (2015+ 3G)
    • Arteon 2.0 TSI (2017+)
    • T-Roc R 2.0 TSI (2019+)
  • Audi:
    • A3 2.0 TSI / 1.8 TSI (2013+ 8V)
    • S3 (2013+ 8V)
    • TT 2.0 TSI III (2014+ 8S)
    • SQ2 (2018+)
    • Q3 45TFSI 2.0 TSI (2018+)
  • SEAT:
    • Leon Cupra III (2014+ 5F)
    • Leon 1.8 TSI (2014+ 5F)
    • Ateca Cupra 2.0 TSI (2018+)
  • Skoda:
    • Octavia vRS III (2014+ 5E)
    • Superb III 1.8 / 2.0 TSI (2015+ B8 3V)
About this kit
Enhance your vehicle’s performance with the Blaze Performance Turbo Inlet System, specifically engineered for various VW, Audi, SEAT, and Skoda models. This system is designed to improve turbo spool, torque, and overall power, delivering a smooth and efficient driving experience. With a robust build, versatile turbo compatibility, and precision-engineered airflow design, this is the ultimate upgrade for performance enthusiasts seeking optimal engine response.
The Blaze Performance Turbo Inlet System is designed for enthusiasts seeking to unlock the full potential of their vehicle. With its wide turbo compatibility and optimized airflow design, this system offers substantial gains in turbo efficiency, torque, and power. Crafted from premium materials and engineered for a precise fit, this is the ultimate performance upgrade for your vehicle’s turbo system.Enhance your driving experience and maximize your vehicle’s performance with the Blaze Performance Turbo Inlet System. Order today for fast shipping and excellent customer support!
Key features
  • Full-Width, Stepped Back Air Guide: Directs airflow from both grille inlet ducts without obstruction. The air guide seals against the hood, creating a clean passage into the 120mm filter inlet, maximizing ram air effect and reducing turbulence.
  • Reverse Mounted, Washable 120mm (4.7″) Dry Cotton Filter: Featuring a large-diameter inlet, this filter minimizes airflow resistance, ensuring a smooth and substantial flow of air. The outlet is specifically shaped to optimize air exit.
  • Full Carbon  – 100mm (4″) Outlet with Heat Shield: Housed in a Carbon Fiber casing, the air filter is protected from engine bay heat, maintaining a cool airflow. The 100mm outlet provides a high-volume passage for uninterrupted airflow.
  • 100mm to 76mm (4″ to 3″) Turbo Inlet Hose: This 4-ply, wire-reinforced silicone hose tapers from 100mm at the inlet to 76mm at the outlet, ensuring minimal turbulence. The silicone also acts as a heat insulator, improving airflow efficiency.
  • Large Diameter Flanges for Turbo Compatibility: The 76mm (3″) outlet accommodates a large inlet flange, allowing the system to be compatible with various turbocharger setups. The design eliminates restrictive elbows, maximizing airflow to the turbo.
Specs & compatibility
The Blaze Performance Turbo Inlet System is compatible with the following turbochargers:
  • Garrett IS12/20/38
  • Garrett IS38 Hybrid (Vortex XL, TTE, Littco, CTS, LM series)
  • Garrett Power MAX (Stages 1 & 2) – via 2-bolt flange
  • APR DTR6054, TPC, RAC, Mabo – via 3-bolt flange
  • EQT Typhoon/CTS BOSS 700 – direct coupling to turbo
  • 100mm (4″) Outlet: Carbon Fiber, closed casing, available in Gloss or Matte Carbon
  • 120mm (4.7″) Dry Cotton Filter: Reusable and washable for long-term use
  • 4-Ply Silicone Turbo Inlet Hose: Steel-reinforced for durability
  • Multiple Turbo Fitment Options: Compatible with stock, hybrid, and big turbos
  • Stainless Steel Clamps and VITON O-Ring Seal
  • Bolt-on Fitment: Easy installation for both LHD and RHD models
Frequently asked questions

Will this intake fit my car?

This kit is designed and validated for the vehicles listed in the “Fits these vehicles” box above. If your year, model and engine code match, it is a direct-fit installation. If you are unsure, email sales@blazeperformance.com with your VIN and we will confirm fitment.

Do I need a tune (remap) to run this intake?

No — the kit is designed to work safely on a stock ECU map. You will get airflow and intake-note gains either way. If you are already running a Stage 1 or higher tune, this intake is fully compatible.

Is the install reversible?

Yes. The kit bolts on using the existing OEM mounting points and the original airbox can be re-installed at any time. There is no cutting, drilling or permanent modification.

Off-road or street legal?

Blaze Performance products are sold for closed-course, off-road and motorsport competition use. Local regulations on emissions and intake modifications vary by country — please check your local laws before fitting to a road-registered vehicle.

The post VW Mk7/Mk7.5 GTI/R / Audi S3 8V – AToM Race V2 Carbon Cold Air Intake (EA888.3) appeared first on Blaze Performance.

]]> VW Mk7/Mk7.5 GTI/R / Audi S3 8V – AToM Pro V2 Cold Air Intake (EA888.3) https://blaze-performance.com/product/vag-mqb-ea888-atom-pro-v2-76mm-3-full-induction-kit/ Fri, 08 Dec 2023 14:24:20 +0000 https://blaze-performance.com/?post_type=product&p=3283 Cold air intake for MQB EA888 Gen 3 2.0 TSI. 76 mm (3″) inlet. Direct fit, no tune required. Full vehicle list and specs in the description below.

The post VW Mk7/Mk7.5 GTI/R / Audi S3 8V – AToM Pro V2 Cold Air Intake (EA888.3) appeared first on Blaze Performance.

]]> Vehicle fitment guide VW
  • Golf 7 / 7.5 R (2013-2020)
  • Golf 7 / 7.5 GTI & Clubsport (2013-2020)
  • Golf 7 / 7.5 1.8 TSI (2013-2020)
  • Passat B8 2.0 TSI (2015+)
  • Arteon 2.0 TSI (2017-2020)
  • T-Roc 2.0 TSI (2017-2022)
  • Tiguan II 2.0 TSI (2016-2020)
  • Tiguan II 2.0 TSI 245ps (2021+)
  • Jetta / GLI Mk7 (2018+)
Audi
  • S3 8V (2013-2020)
  • A3 2.0 / 1.8 TSI 8V (2013-2020)
  • TT Mk3 8S (2014+)
  • TTS 2.0 TFSI 8S (2015-2021)
  • TT 2.0 TFSI 8S (2014+)
  • SQ2 (2018+)
  • Q3 45 TFSI 2.0 TSI (2018+)
Cupra / SEAT
  • SEAT Leon III Cupra 5F (2014-2020)
  • SEAT Leon III 1.8 TSI 5F (2014-2020)
  • Cupra Ateca (2018+)
  • SEAT Tarraco 2.0 TSI (2018+)
Skoda
  • Octavia III vRS 2.0 TSI 5E (2014-2020)
  • Superb III 1.8 / 2.0 TSI 3V (2015+)
Engine platform: MQB EA888 Gen 3 (1.8 & 2.0 TSI)  |  Inlet: 76 mm (3″) Mk8 / Mk8.5 GTI? This kit fits Mk7 (EA888 Gen 3) only. The Mk8 GTI uses the EA888 evo4 with a Garrett turbo and needs our dedicated AToM V2 Mk8 GTI intake. Mk8 R / 8Y S3 / Cupra Leon Mk4 / Arteon R / Tiguan R 320ps / TTS EA888.4? Those run the EA888.4 evo4 engine — see our AToM R8CE intake instead.
About this kit
Description Introducing a high-quality performance upgrade, this turbo inlet system is designed to fit a wide range of vehicles, including various VW, Audi, SEAT, and Skoda models. Offering improved turbo spool, torque, and power, this product ensures an optimal driving experience.   Key Features:
  •  Full-Width, Stepped Back Air Guide: The air guide catches air from both grille inlet ducts without blocking them. This minimizes turbulence as air rushes into the grille, allowing it to pass smoothly. The duct seals against the hood, creating a large clean space for air to enter and be guided into the 120mm filter inlet for maximum ram air effect.
  • Reverse Mounted, Washable, Reusable 120mm (4.7″) Dry Cotton Filter: This large diameter filter inlet minimizes resistance to flow, providing a huge mouth for air entry. The shaped filter outlet ensures air exits as smoothly as possible.
  • 76mm (3″) Outlet heat shield: Sealed inside a powder-coated aluminium case, the air filter shields against hot air from the engine bay. This provides a large volume for air accumulation, and a 100mm (4″) outlet ensures high-volume airflow.
  • 76mm – 76mm (3″) Turbo Inlet Hose: The 4-ply, wire-reinforced silicone hose that maintains a 76mm (3″) diameter from inlet to outlet, keeping the air as turbulent-free as possible. Silicone insulates against heat from the turbo area, minimizing wall friction and airspeed.
  • Large Diameter Flanges with Multiple Turbo Compatibility: The 76mm (3”) outlet of the turbo inlet hose allows the use of a massive inlet flange, making the AToM Pro V2 compatible with various turbocharger systems without compromising performance. On several designs, smaller inlet elbows provided by the turbo manufacturer were eliminated, maximizing flow to the turbo.
  • Turbo Compatibility: The AToM Pro V2 is compatible with the following turbos, either through a suitable flange or direct coupling of the hose onto the turbo:
Garrett IS12/20/38 Garrett IS38 Hybrid (Vortex XL/TTE/Littco/CTS/LM series/etc) Garrett Power MAX (1&2) – with a 2-bolt hole, suited flange APR DTR6054/TPC/RAC/Mabo – with a 3-bolt hole, suited flange EQT Typhoon/CTS BOSS 700 – by means of direct coupling to turbo
  • Bolt on fitment: Perfect fit for both LHD and RHD models
Specifications:
  • 76mm (4″) Outlet, Powder-Coated Closed Aluminium Casing
  •  120mm (4.7″) Dry Cotton Filter
  • 4 Ply Silicone, Steel-Reinforced, Turbo Inlet Hose
  • Multiple Turbo Fitment Options: Stock/Hybrid/Big Turbo
  • Stainless Steel Clamps
  • VITON O-Ring Seal
  • Bolt-on Fitment for a Wide Range of Vehicles
Vehicle Fitment Guide: VW Models: Golf 7 & 7.5 GTI & Clubsport 2013+ 5G, Golf 7 & 7.5R 2013+ 5G, Golf 7 & 7.5 1.8 TSI 2013+ 5G, Passat 2.0 TSI B8 2015+ 3G, Arteon 2.0 TSI 2017+, T-Roc R 2.0 TSI 2019+ Audi Models: A3 2.0 TSI / 1.8 TSI 2013+ 8V, S3 2013+ 8V, TT 2.0 TSI III 2014+ 8S, SQ2 2018+, Q3 45TFSI 2.0 TSI 2018+ SEAT Models: Leon Cupra III 2014+ 5F, Leon 1.8 TSI 2014+ 5F, Ateca Cupra 2.0 TSI 2018+ Skoda Models: Octavia vRS III 2014+ 5E, Superb III 1.8 / 2.0 TSI 2015+ B8 3V Experience a notable boost in your vehicle’s performance with this high-quality turbo inlet system. Offering easy installation and compatibility with a wide range of vehicles, it’s an excellent choice for car enthusiasts. Order now for fast shipping and exceptional customer service.  
Frequently asked questions

Will this intake fit my car?

This kit is designed and validated for the vehicles listed in the “Fits these vehicles” box above. If your year, model and engine code match, it is a direct-fit installation. If you are unsure, email sales@blazeperformance.com with your VIN and we will confirm fitment.

Do I need a tune (remap) to run this intake?

No — the kit is designed to work safely on a stock ECU map. You will get airflow and intake-note gains either way. If you are already running a Stage 1 or higher tune, this intake is fully compatible.

Is the install reversible?

Yes. The kit bolts on using the existing OEM mounting points and the original airbox can be re-installed at any time. There is no cutting, drilling or permanent modification.

Off-road or street legal?

Blaze Performance products are sold for closed-course, off-road and motorsport competition use. Local regulations on emissions and intake modifications vary by country — please check your local laws before fitting to a road-registered vehicle.

The post VW Mk7/Mk7.5 GTI/R / Audi S3 8V – AToM Pro V2 Cold Air Intake (EA888.3) appeared first on Blaze Performance.

]]> VW Mk7/Mk7.5 GTI/R / Audi S3 8V – AToM Race V2 100mm Cold Air Intake (EA888.3) https://blaze-performance.com/product/vag-mqb-ea888-atom-race-v2-100mm-4-full-induction-kit/ Fri, 08 Dec 2023 14:05:29 +0000 https://blaze-performance.com/?post_type=product&p=3269 Race-spec cold air intake for MQB EA888 Gen 3 2.0 TSI. 100 mm (4″) inlet. Direct fit, no tune required. Full vehicle list and specs in the description below.

The post VW Mk7/Mk7.5 GTI/R / Audi S3 8V – AToM Race V2 100mm Cold Air Intake (EA888.3) appeared first on Blaze Performance.

]]> Vehicle fitment guide VW
  • Golf 7 / 7.5 R (2013-2020)
  • Golf 7 / 7.5 GTI & Clubsport (2013-2020)
  • Golf 7 / 7.5 1.8 TSI (2013-2020)
  • Passat B8 2.0 TSI (2015+)
  • Arteon 2.0 TSI (2017-2020)
  • T-Roc 2.0 TSI (2017-2022)
  • Tiguan II 2.0 TSI (2016-2020)
  • Tiguan II 2.0 TSI 245ps (2021+)
  • Jetta / GLI Mk7 (2018+)
Audi
  • S3 8V (2013-2020)
  • A3 2.0 / 1.8 TSI 8V (2013-2020)
  • TT Mk3 8S (2014+)
  • TTS 2.0 TFSI 8S (2015-2021)
  • TT 2.0 TFSI 8S (2014+)
  • SQ2 (2018+)
  • Q3 45 TFSI 2.0 TSI (2018+)
Cupra / SEAT
  • SEAT Leon III Cupra 5F (2014-2020)
  • SEAT Leon III 1.8 TSI 5F (2014-2020)
  • Cupra Ateca (2018+)
  • SEAT Tarraco 2.0 TSI (2018+)
Skoda
  • Octavia III vRS 2.0 TSI 5E (2014-2020)
  • Superb III 1.8 / 2.0 TSI 3V (2015+)
Engine platform: MQB EA888 Gen 3 (1.8 & 2.0 TSI)  |  Inlet: 100 mm (4″) Mk8 / Mk8.5 GTI? This kit fits Mk7 (EA888 Gen 3) only. The Mk8 GTI uses the EA888 evo4 with a Garrett turbo and needs our dedicated AToM V2 Mk8 GTI intake. Mk8 R / 8Y S3 / Cupra Leon Mk4 / Arteon R / Tiguan R 320ps / TTS EA888.4? Those run the EA888.4 evo4 engine — see our AToM R8CE intake instead.
The Blaze Performance Turbo Inlet System fits the following models:
  • Volkswagen:
    • Golf 7 & 7.5 GTI & Clubsport (2013+ 5G)
    • Golf 7 & 7.5 R (2013+ 5G)
    • Golf 7 & 7.5 1.8 TSI (2013+ 5G)
    • Passat 2.0 TSI B8 (2015+ 3G)
    • Arteon 2.0 TSI (2017+)
    • T-Roc R 2.0 TSI (2019+)
  • Audi:
    • A3 2.0 TSI / 1.8 TSI (2013+ 8V)
    • S3 (2013+ 8V)
    • TT 2.0 TSI III (2014+ 8S)
    • SQ2 (2018+)
    • Q3 45TFSI 2.0 TSI (2018+)
  • SEAT:
    • Leon Cupra III (2014+ 5F)
    • Leon 1.8 TSI (2014+ 5F)
    • Ateca Cupra 2.0 TSI (2018+)
  • Skoda:
    • Octavia vRS III (2014+ 5E)
    • Superb III 1.8 / 2.0 TSI (2015+ B8 3V)
About this kit
Enhance your vehicle’s performance with the Blaze Performance Turbo Inlet System, specifically engineered for various VW, Audi, SEAT, and Skoda models. This system is designed to improve turbo spool, torque, and overall power, delivering a smooth and efficient driving experience. With a robust build, versatile turbo compatibility, and precision-engineered airflow design, this is the ultimate upgrade for performance enthusiasts seeking optimal engine response.
The Blaze Performance Turbo Inlet System is designed for enthusiasts seeking to unlock the full potential of their vehicle. With its wide turbo compatibility and optimized airflow design, this system offers substantial gains in turbo efficiency, torque, and power. Crafted from premium materials and engineered for a precise fit, this is the ultimate performance upgrade for your vehicle’s turbo system.
Enhance your driving experience and maximize your vehicle’s performance with the Blaze Performance Turbo Inlet System. Order today for fast shipping and excellent customer support!
Key features
  • Full-Width, Stepped Back Air Guide: Directs airflow from both grille inlet ducts without obstruction. The air guide seals against the hood, creating a clean passage into the 120mm filter inlet, maximizing ram air effect and reducing turbulence.
  • Reverse Mounted, Washable 120mm (4.7″) Dry Cotton Filter: Featuring a large-diameter inlet, this filter minimizes airflow resistance, ensuring a smooth and substantial flow of air. The outlet is specifically shaped to optimize air exit.
  • 100mm (4″) Outlet with Heat Shield: Housed in a powder-coated aluminum casing, the air filter is protected from engine bay heat, maintaining a cool airflow. The 100mm outlet provides a high-volume passage for uninterrupted airflow.
  • 100mm to 76mm (4″ to 3″) Turbo Inlet Hose: This 4-ply, wire-reinforced silicone hose tapers from 100mm at the inlet to 76mm at the outlet, ensuring minimal turbulence. The silicone also acts as a heat insulator, improving airflow efficiency.
  • Large Diameter Flanges for Turbo Compatibility: The 76mm (3″) outlet accommodates a large inlet flange, allowing the system to be compatible with various turbocharger setups. The design eliminates restrictive elbows, maximizing airflow to the turbo.
Specs & compatibility
The Blaze Performance Turbo Inlet System is compatible with the following turbochargers:
  • Garrett IS12/20/38/Vortex Standard
  • Garrett IS38 Hybrid (Vortex XL, TTE, Littco, CTS, LM series)
  • Garrett Power MAX (Stages 1 & 2) – via 2-bolt flange
  • APR DTR6054, TPC, RAC, Mabo – via 3-bolt flange
  • EQT Typhoon & 660/CTS BOSS 700 – direct coupling to turbo
  • 100mm (4″) Outlet: Powder-coated, closed aluminum casing
  • 120mm (4.7″) Dry Cotton Filter: Reusable and washable for long-term use
  • 4-Ply Silicone Turbo Inlet Hose: Steel-reinforced for durability
  • Multiple Turbo Fitment Options: Compatible with stock, hybrid, and big turbos
  • Stainless Steel Clamps and VITON O-Ring Seal
  • Bolt-on Fitment: Easy installation for both LHD and RHD models
Frequently asked questions

Will this intake fit my car?

This kit is designed and validated for the vehicles listed in the “Fits these vehicles” box above. If your year, model and engine code match, it is a direct-fit installation. If you are unsure, email sales@blazeperformance.com with your VIN and we will confirm fitment.

Do I need a tune (remap) to run this intake?

No — the kit is designed to work safely on a stock ECU map. You will get airflow and intake-note gains either way. If you are already running a Stage 1 or higher tune, this intake is fully compatible.

Is the install reversible?

Yes. The kit bolts on using the existing OEM mounting points and the original airbox can be re-installed at any time. There is no cutting, drilling or permanent modification.

Off-road or street legal?

Blaze Performance products are sold for closed-course, off-road and motorsport competition use. Local regulations on emissions and intake modifications vary by country — please check your local laws before fitting to a road-registered vehicle.

The post VW Mk7/Mk7.5 GTI/R / Audi S3 8V – AToM Race V2 100mm Cold Air Intake (EA888.3) appeared first on Blaze Performance.

]]> VW MQB EA888 Gen 3 Turbo Inlet Pipe 100mm (4″) – Golf 7 GTI/R / Audi S3 8V https://blaze-performance.com/product/vag-mqb-ea888-turbo-inlet-pipe-100mm-4/ Fri, 08 Dec 2023 09:48:19 +0000 https://blaze-performance.com/?post_type=product&p=3168 100 mm (4″) turbo inlet pipe for MQB EA888 Gen 3 (1.8 / 2.0 TSI). Direct replacement for the OEM elbow. Full vehicle list and specs in the description below.

The post VW MQB EA888 Gen 3 Turbo Inlet Pipe 100mm (4″) – Golf 7 GTI/R / Audi S3 8V appeared first on Blaze Performance.

]]> Vehicle fitment guide VW
  • Golf 7 / 7.5 R (2013-2020)
  • Golf 7 / 7.5 GTI & Clubsport (2013-2020)
  • Golf 7 / 7.5 1.8 TSI (2013-2020)
  • Passat B8 2.0 TSI (2015+)
  • Arteon 2.0 TSI (2017-2020)
  • T-Roc 2.0 TSI (2017-2022)
  • Tiguan II 2.0 TSI (2016-2020)
  • Tiguan II 2.0 TSI 245ps (2021+)
  • Jetta / GLI Mk7 (2018+)
Audi
  • S3 8V (2013-2020)
  • A3 2.0 / 1.8 TSI 8V (2013-2020)
  • TT Mk3 8S (2014+)
  • TTS 2.0 TFSI 8S (2015-2021)
  • TT 2.0 TFSI 8S (2014+)
  • SQ2 (2018+)
  • Q3 45 TFSI 2.0 TSI (2018+)
Cupra / SEAT
  • SEAT Leon III Cupra 5F (2014-2020)
  • SEAT Leon III 1.8 TSI 5F (2014-2020)
  • Cupra Ateca (2018+)
  • SEAT Tarraco 2.0 TSI (2018+)
Skoda
  • Octavia III vRS 2.0 TSI 5E (2014-2020)
  • Superb III 1.8 / 2.0 TSI 3V (2015+)
Engine platform: MQB EA888 Gen 3 (1.8 & 2.0 TSI)  |  Inlet: 100 mm (4″) Mk8 / Mk8.5 GTI? Use our dedicated AToM V2 Mk8 GTI intake (EA888 evo4, Garrett turbo). Mk8 R / 8Y S3 / EA888.4 evo4? See our AToM R8CE intake.
About this kit
Features:
  • Fits VAG MQB EA888 Vehicles – Bolt-on Fitment
  • Improved turbo spool, torque, and power
  • 100mm (4inch) Turbo Inlet Hose
  • Billet Couplings
Specifications:
  • Constructed from 4 Ply Silicone, steel-reinforced, Turbo Inlet Hose
  • Billet aluminium PCV Couplings
  • 56mm Internal Diameter Turbo inlet flange
  • Stainless steel clamps
Vehicle Fitment Guide: Left Hand Drive and RIght Hand Drive Vehicles:
  • VW Golf 7 & 7.5 GTI & Clubsport 2013+ 5G | VW Golf 7 & 7.5R 2013+ 5G | VW Golf 7 & 7.5 1.8 TSI 2013+ 5G | VW Passat 2.0 TSI B8 2015+ 3G | VW Arteon 2.0 TSI 2017+ | VW T-Roc R 2.0 TSI 2019+ | Audi A3 2.0 TSI / 1.8 TSI 2013+ 8V | Audi S3 2013+ 8V
  • Audi TT 2.0 TSI III 2014+ 8S | Audi SQ2 2018+ | Audi Q3 45TFSI 2.0 TSI 2018+ | SEAT Leon Cupra III 2014+ 5F | SEAT Leon 1.8 TSI 2014+ 5F | SEAT Ateca Cupra 2.0 TSI 2018+ | Skoda Octavia vRS III 2014+ 5E |Skoda Superb III 1.8 / 2.0 TSI 2015+ B8 3
Frequently asked questions

What does a turbo inlet pipe do?

It replaces the OEM intake elbow that connects the air filter to the turbo inlet. The OEM part has restrictive internal geometry and a fixed cross-section. The Blaze inlet pipe is smoother, larger-diameter (76mm or 100mm depending on the model), and reduces airflow turbulence into the turbo.

76mm or 100mm — which should I choose?

The 76mm (3-inch) inlet is a direct upgrade for OEM and pairs well with the AToM PRO intake. The 100mm (4-inch) inlet supports higher airflow and is recommended for the AToM RACE intake or for higher-power builds. The two are not interchangeable — pick to match your intake.

Will this fit my car?

See the “Fits these vehicles” box above. The inlet pipe is a direct replacement for the OEM elbow on MQB EA888 Gen 3 cars.

Do I need a tune?

No — the inlet pipe is safe on a stock ECU. It is most commonly fitted alongside a cold air intake and/or charge pipe upgrade.

The post VW MQB EA888 Gen 3 Turbo Inlet Pipe 100mm (4″) – Golf 7 GTI/R / Audi S3 8V appeared first on Blaze Performance.

]]> VW MQB EA888 Gen 3 Turbo Inlet Pipe 76mm (3″) – Golf 7 GTI/R / Audi S3 8V https://blaze-performance.com/product/vag-mqb-ea888-turbo-inlet-pipe-76mm-3inch/ Thu, 07 Dec 2023 12:12:08 +0000 https://blaze-performance.com/?post_type=product&p=2998 76 mm (3″) turbo inlet pipe for MQB EA888 Gen 3 (1.8 / 2.0 TSI). Direct replacement for the OEM elbow. Full vehicle list and specs in the description below.

The post VW MQB EA888 Gen 3 Turbo Inlet Pipe 76mm (3″) – Golf 7 GTI/R / Audi S3 8V appeared first on Blaze Performance.

]]> Vehicle fitment guide VW
  • Golf 7 / 7.5 R (2013-2020)
  • Golf 7 / 7.5 GTI & Clubsport (2013-2020)
  • Golf 7 / 7.5 1.8 TSI (2013-2020)
  • Passat B8 2.0 TSI (2015+)
  • Arteon 2.0 TSI (2017-2020)
  • T-Roc 2.0 TSI (2017-2022)
  • Tiguan II 2.0 TSI (2016-2020)
  • Tiguan II 2.0 TSI 245ps (2021+)
  • Jetta / GLI Mk7 (2018+)
Audi
  • S3 8V (2013-2020)
  • A3 2.0 / 1.8 TSI 8V (2013-2020)
  • TT Mk3 8S (2014+)
  • TTS 2.0 TFSI 8S (2015-2021)
  • TT 2.0 TFSI 8S (2014+)
  • SQ2 (2018+)
  • Q3 45 TFSI 2.0 TSI (2018+)
Cupra / SEAT
  • SEAT Leon III Cupra 5F (2014-2020)
  • SEAT Leon III 1.8 TSI 5F (2014-2020)
  • Cupra Ateca (2018+)
  • SEAT Tarraco 2.0 TSI (2018+)
Skoda
  • Octavia III vRS 2.0 TSI 5E (2014-2020)
  • Superb III 1.8 / 2.0 TSI 3V (2015+)
Engine platform: MQB EA888 Gen 3 (1.8 & 2.0 TSI)  |  Inlet: 76 mm (3″) Mk8 / Mk8.5 GTI? Use our dedicated AToM V2 Mk8 GTI intake (EA888 evo4, Garrett turbo). Mk8 R / 8Y S3 / EA888.4 evo4? See our AToM R8CE intake.
About this kit
Features:
  • Fits VAG MQB EA888 Vehicles – Bolt-on Fitment
  • Improved turbo spool, torque, and power
  • 76mm (3inch) Turbo Inlet Hose
  • Billet Couplings
Specifications:
  • Constructed from 4 Ply Silicone, steel-reinforced, Turbo Inlet Hose
  • Billet aluminium PCV Couplings
  • 56mm Internal Diameter Turbo inlet flange
  • Stainless steel clamps
Vehicle Fitment Guide: Left and Right Hand Drive Vehicles:
  • VW Golf 7 & 7.5 GTI & Clubsport 2013+ 5G | VW Golf 7 & 7.5R 2013+ 5G | VW Golf 7 & 7.5 1.8 TSI 2013+ 5G | VW Passat 2.0 TSI B8 2015+ 3G | VW Arteon 2.0 TSI 2017+ | VW T-Roc R 2.0 TSI 2019+ | Audi A3 2.0 TSI / 1.8 TSI 2013+ 8V | Audi S3 2013+ 8V
  • Audi TT 2.0 TSI III 2014+ 8S | Audi SQ2 2018+ | Audi Q3 45TFSI 2.0 TSI 2018+ | SEAT Leon Cupra III 2014+ 5F | SEAT Leon 1.8 TSI 2014+ 5F | SEAT Ateca Cupra 2.0 TSI 2018+ | Skoda Octavia vRS III 2014+ 5E |Skoda Superb III 1.8 / 2.0 TSI 2015+ B8 3V
Frequently asked questions

What does a turbo inlet pipe do?

It replaces the OEM intake elbow that connects the air filter to the turbo inlet. The OEM part has restrictive internal geometry and a fixed cross-section. The Blaze inlet pipe is smoother, larger-diameter (76mm or 100mm depending on the model), and reduces airflow turbulence into the turbo.

76mm or 100mm — which should I choose?

The 76mm (3-inch) inlet is a direct upgrade for OEM and pairs well with the AToM PRO intake. The 100mm (4-inch) inlet supports higher airflow and is recommended for the AToM RACE intake or for higher-power builds. The two are not interchangeable — pick to match your intake.

Will this fit my car?

See the “Fits these vehicles” box above. The inlet pipe is a direct replacement for the OEM elbow on MQB EA888 Gen 3 cars.

Do I need a tune?

No — the inlet pipe is safe on a stock ECU. It is most commonly fitted alongside a cold air intake and/or charge pipe upgrade.

The post VW MQB EA888 Gen 3 Turbo Inlet Pipe 76mm (3″) – Golf 7 GTI/R / Audi S3 8V appeared first on Blaze Performance.

]]>